Choosing a Building Defect Inspection

One Problem to Investigate

A focused defect inspection suits a particular concern, such as cracking, recurring damp, a leaking roof or timber decay. We agree the affected areas and the questions you need answered before visiting.

Tell us when the problem began, how it has changed and which repairs have already been tried. Previous reports and dated photographs can help establish the history.

Need Advice on the Whole Property?

If you are buying a home or need a wider assessment of its condition, a RICS Home Survey (Level 2) or Full Building Survey (Level 3) may be more suitable.

Send the property details and your concerns so we can recommend the appropriate inspection.

Compare Level 2 & Level 3 Surveys
Brickwork and the junction with a rendered upper wall
Wall construction & junctions
Gutter and roof junction inspected for signs of water entry
Roof drainage & water ingress
Weathered paint and timber around a window sill
Timber & joinery condition

Defects We Investigate

We examine the affected area and the surrounding construction to understand how the problem has developed. The findings are considered together with the building’s materials, alterations and repair history.

Cracking & Movement

We look at the pattern of cracking, changes over time and related signs such as distorted openings or sticking doors. Causes can include shrinkage, settlement, altered support and ground movement. Cracking does not automatically mean subsidence.

Damp, Mould & Condensation

We consider rain penetration, plumbing and drainage leaks, ground moisture, heating and ventilation. Moisture readings and, where useful, handheld thermal imaging support the inspection. They are interpreted alongside the construction and visible damage.

Roof Leaks & Water Ingress

Water can travel before it appears indoors. We examine accessible roof timbers, coverings, flashings, chimneys and gutters, comparing external details with internal signs of leakage. A drone inspection can be added where access and flight conditions allow.

Timber Decay & Wood-Boring Insects

We assess wet rot, dry rot, signs of wood-boring insects and the moisture conditions that can cause timber deterioration. Old insect holes or staining do not alone establish an active problem. Concealed timber may need further inspection before the extent of damage is known.

External Walls, Render & Masonry

Cracked render, failed pointing and bulging masonry are assessed against the wall’s construction and earlier repairs. Findings may point to further checks of wall ties or the support above openings.

What Your Defect Report Covers

Your building defect report brings the findings together and explains the practical next steps.

  • The condition found and the likely cause of the problem
  • Recommended repairs or maintenance, with priorities
  • What remains uncertain because of access or missing information
  • Any monitoring or further investigation needed before repairs are specified

The advice addresses the cause as well as the resulting damage. Redecoration alone may fail if the underlying moisture or movement remains unresolved.

Further Investigation & Structural Advice

Resolving What Cannot Yet Be Seen

A visual inspection may lead to crack monitoring, a CCTV drainage survey, localised opening-up, material testing or specialist timber investigation. We explain what each check should establish and how it could affect the repair.

Opening-up and additional investigation are agreed separately before proceeding.

Structural Defects & Alterations

Removed walls, altered roof timbers, roof spread or inadequate support may need structural engineering assessment. Where required, we work with Stephen D’Aulby, our consultant Chartered Structural Engineer, with the additional work agreed beforehand.

Structural Engineering

From Diagnosis to Repair

Once the cause and extent are understood, you can arrange quotations for the recommended work. If you need contractors to price a consistent scope, we can prepare a Technical Specification of Works as a separate instruction.

For a larger repair project, contract administration can help manage the agreed work, changes and payments through to completion.

Advice for Particular Buildings & Materials

Listed & Historic Buildings

Traditional construction needs repairs suited to its materials. We consider solid walls, lime finishes and timber framing, including the effects of later cement repairs or coatings that restrict drying. The aim is to retain sound fabric and understand the cause before choosing a repair.

Listed & Historic Building Surveys

Spray Foam Insulation

Our dedicated spray foam service considers accessible roof timbers, moisture, ventilation and installation records. If a lender or valuer has requested a report, send their requirements before booking.

Spray Foam Surveys & Lender Reports

Frequently Asked Questions

Can you inspect one particular defect?

Yes. We can agree an inspection around a specific concern, such as cracking, damp, water ingress, timber decay or movement.

Can you confirm whether cracking is subsidence?

We investigate cracking and movement, assess the likely cause and advise what to do next. If the evidence points to possible subsidence, monitoring or investigations of drains, foundations and ground conditions may be needed before the cause can be confirmed. We explain the checks required and whether structural engineering advice would help.

Can you investigate damp and mould?

Yes. We investigate possible moisture sources and consider the building’s construction, heating and ventilation. Moisture readings form part of the assessment where appropriate.

Will you open up walls, floors or ceilings?

Only where this has been agreed beforehand. If opening-up is needed, we identify what should be exposed and what the investigation is intended to establish.

Can structural engineering be included?

Yes. If the defect needs engineering assessment, we can involve our consultant Chartered Structural Engineer. We confirm the additional work with you before arranging it.

Can you inspect a leaking roof by drone?

Yes, where flight conditions allow. We can use drone photographs to examine roof coverings, flashings and gutters as part of the defect investigation. We compare the external findings with signs of leakage inside and advise on repairs or any further inspection needed to establish the cause.

What should I send before a defect inspection?

Send photographs of the affected area and its surroundings, a brief history and details of repairs already attempted. Include any earlier reports, drawings or monitoring records. For an intermittent leak, tell us when it occurs and whether particular weather conditions seem to trigger it.

Related Services